View BPX48F_1220102.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Silizium-Differential-Fotodiode Silicon Differential Photodiode BPX 48 BPX 48 F
BPX 48
BPX 48 F
Wesentliche Merkmale * Speziell geeignet fur Anwendungen im Bereich von 400 nm bis 1100 nm (BPX 48) und bei 920 nm (BPX 48 F) * Hohe Fotoempfindlichkeit * DIL-Plastikbauform mit hoher Packungsdichte * Doppeldiode mit extrem hoher Gleichmaigkeit
Features * Especially suitable for applications from 400 nm to 1100 nm (BPX 48) and of 920 nm (BPX 48 F) * High photosensitivity * DIL plastic package with high packing density * Double diode with extremely high homogeneousness Application * * * * * Follow-up control Edge control Path and angle scanning Industrial electronics For control and drive circuits
Anwendungen * * * * * Nachlaufsteuerung Kantenfuhrungen Weg- bzw. Winkelabtastungen Industrieelektronik Messen/Steuern/Regeln" Bestellnummer Ordering Code Q62702-P17-S1 Q62702-P305
Typ Type BPX 48 BPX 48 F
2001-02-21
1
BPX 48, BPX 48 F
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Lottemperatur (Lotstelle 2 mm vom Gehause entfernt bei Lotzeit t 3 s) Soldering temperature in 2 mm distance from case bottom (t 3 s) Sperrspannung Reverse voltage Verlustleistung, TA = 25 C Total power dissipation Symbol Symbol Wert Value - 40 ... + 80 230 Einheit Unit C C
Top; Tstg TS
VR Ptot
10 50
V mW
Kennwerte (TA = 25 C) fur jede Einzeldiode Characteristics (TA = 25 C) per single diode system Bezeichnung Parameter Fotostrom Photocurrent VR = 5 V, Normlicht/standard light A, T = 2856 K, EV = 1000 Ix VR = 5 V, = 950 nm, Ee = 0.5 mW/cm2 Wellenlange der max. Fotoempfindlichkeit Wavelength of max. sensitivity Spektraler Bereich der Fotoempfindlichkeit Symbol Symbol BPX 48 Wert Value BPX 48 F Einheit Unit
IP IP
S max
24 ( 15) - 900 400 ... 1150
- 7.5 ( 4.0) 920 750 ... 1150
A A nm nm
S = 10% von Smax
Spectral range of sensitivity S = 10% of Smax Bestrahlungsempfindliche Flache Radiant sensitive area Abmessung der bestrahlungsempfindlichen Flache Dimensions of radiant sensitive area Abstand Chipoberflache zu Gehauseoberflache Distance chip front to case surface
A LxB LxW H
1.54 0.7 x 2.2
1.54 0.7 x 2.2
mm2 mm x mm
0.5
0.5
mm
2001-02-21
2
BPX 48, BPX 48 F
Kennwerte (TA = 25 C) fur jede Einzeldiode Characteristics (TA = 25 C) per single diode system (cont'd) Bezeichnung Parameter Halbwinkel Half angle Dunkelstrom, VR = 10 V Dark current Spektrale Fotoempfindlichkeit Spectral sensitivity = 850 nm = 950 nm Max. Abweichung der Fotoempfindlichkeit der Systeme vom Mittelwert Max. deviation of the system spectral sensitivity from the average Quantenausbeute Quantum yield = 850 nm = 950 nm Leerlaufspannung Open-circuit voltage Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, = 950 nm Kurzschlustrom Short-circuit current Ev = 1000 Ix, Normlicht/standard light A, T = 2856 K Ee = 0.5 mW/cm2, = 950 nm Anstiegs- und Abfallzeit des Fotostromes Rise and fall time of the photocurrent RL = 1 k; VR = 5 V; = 850 nm; Ip = 20 A Durchlaspannung, IF = 40 mA, E = 0 Forward voltage Kapazitat, VR = 0 V, f = 1 MHz, E = 0 Capacitance Temperaturkoeffizient von VO Temperature coefficient of VO Symbol Symbol BPX 48 60 10 ( 100) Wert Value BPX 48 F 60 10 ( 100) Grad deg. nA Einheit Unit
IR
S S
S
0.55 - 5
- 0.65 5
A/W %
Electrons Photon 0.8 - - 0.95
VO VO
330 ( 280) -
- 300 ( 280)
mV mV
ISC ISC tr, tf
24 - 500
- 7 500
A A ns
VF C0 TCV
1.3 25 - 2.6
1.3 25 - 2.6
V pF mV/K
2001-02-21
3
BPX 48, BPX 48 F
Kennwerte (TA = 25 C) fur jede Einzeldiode Characteristics (TA = 25 C) per single diode system (cont'd) Bezeichnung Parameter Temperaturkoeffizient von ISC Temperature coefficient of ISC Normlicht/standard light A = 950 nm Rauschaquivalente Strahlungsleistung Noise equivalent power VR = 10 V, = 950 nm Nachweisgrenze, VR = 10 V, = 950 nm Detection limit Directional Characteristics Srel = f ()
40 30 20 10
Symbol Symbol BPX 48
Wert Value BPX 48 F
Einheit Unit
TCI TCI NEP
0.18 - 1.0 x 10- 13
- 0.2 1.0 x 10- 13
%/K %/K W ----------Hz cm x Hz ------------------------W
D*
1.2 x 1012
1.2 x 1012
0 1.0
OHF01402
50 0.8 60
0.6
70
0.4
80
0.2 0
90
100
1.0
0.8
0.6
0.4
0
20
40
60
80
100
120
2001-02-21
4
BPX 48, BPX 48 F
Relative Spectral Sensitivity BPX 48 Srel = f () Relative Spectral Sensitivity BPX 48 F Srel = f () Photocurrent IP = f (Ev), VR = 5 V Open-Circuit Voltage VO = f (Ev) BPX 48
Photocurrent IP = f (Ee), VR = 5 V Open-Circuit-Voltage VO = f (Ee) BPX 48 F
Total Power Dissipation Ptot = f (TA)
Dark Current IR = f (VR), E = 0
Capacitance C = f (VR), f = 1 MHz, E = 0
Dark Current
IR = f (TA), VR = 10 V
2001-02-21
5
BPX 48, BPX 48 F
Mazeichnung Package Outlines
7.8 (0.307) 7.4 (0.291) 4.05 (0.159) 3.75 (0.148)
0.8 (0.031)
6.6 (0.260) 6.3 (0.248)
0.8 (0.031) 0.6 (0.024) 0.5 (0.020) 0.3 (0.012) Diode system 1.10 (0.043) 0.09 (0.004) 0.4 (0.016)
2.25 (0.089) 1.85 (0.073) 2.45 (0.096)
0.6 (0.024) 3.5 (0.138)
0.3 (0.012) 0.25 (0.010)
0...5 2.54 (0.100) 0.7 (0.028) 0.5 (0.020) cathode
7.62 (0.300) spacing
anode 2.54 (0.100) Radiant sensitive area 2.0 (0.079) x 0.67 (0.026)
GEOY6638
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2001-02-21
6
3.0 (0.118)
2.2 (0.087) 1.9 (0.075)

▲Up To Search▲

Price & Availability of BPX48F

	To Download BPX48F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .